Trouver Ruban Polypropylène, Ruban à Membrane En Polypropylène, Ruban à Membrane En Polypropylène Anticorrosion dans le répertoire Industry, Reliable Fabricant / Fournisseur / Factory de Chine

Panier (0)
Accueil > Liste de Produits > Ruban Polypropylène > Ruban adhésif en mousse à base de polypropylène anticorrosion

Ruban adhésif en mousse à base de polypropylène anticorrosion

Type de paiement: L/C, Western Union
Quantité de commande minimum: 100 Bag/Bags

Informations de base

Modèle:  T500

Description du produit

Modèle NO: T500 Marque déposée: XUNDA Origine: Jining City, Chine Matériel: PP Spécifications: SGS DVGW EN23068 AWWA C209 C214 Code SH: 39191099 Ruban en membrane en maille de polypropylène (T 500)
IDescription
Le ruban de mousse à maille en polypropylène T 500 est un ruban appliqué à froid pour les pipelines métalliques et des travaux d'imperméabilisation contre les mauvaises herbes extérieures.

Anticorrosive Polypropylene Mesh Membrane Tape

IIStructures
Support: tissu en tissu PP,
Couche adhésive: Composé bitumineux à caoutchouc butyle
III Usages


Waterproofing- Pipelines protection
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
_ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
-Bare pipe length
 

Caractéristiques IV


Waterproofing- Pipes protection
-Cold applied.
-High resistance  to bad weather environment
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers
-Safe,clean
_ Cold applied
_ Excellent self adhesion to pipe
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
_ Excellent resistance to cathodicdisbonding
 









V Données techniques

PHYSICAL PROPERPTIES UNIT TEST METHOD TYPICAL VALUES
Total thickness mil ASTM D 1000 40mils 50mils 60mils 65mils
Tensile Strength lb/in ASTM D 1000 30(5kg/cm) 35(6.3kg/cm) 39(7kg/cm) 42(7.5kg/cm)
Length

25mtrs 20mtrs 15mtrs 10mtrs
Width

2",4",6",9"
Peel adhesion          To primed pipe oz/in ASTM D 1000 269(3kg/cm) 296(3.3kg/cm) 314 (3.5kg/cm) 340(3.8kg/cm)
        To backing oz/in ASTM D 1000 90(1kg/cm) 90(1kg/cm) 117(1.3kg/cm) 135(1.5kg/cm)
Dielectric Strength KV/mm ASTM D 1000 42 42.6 43 43.8
Volume Resistivity ohm·m ASTM D 257 2.5 X 1012 2.5 X 1012 2.5 X 1012 2.5 X 1012
Water Vapor Transmission Rate g/ m2 /24h ASTM E 96 0.06 0.05 0.03 0.02
Water Absorptivity % ASTM D 570 0.1 0.1 0.1 0.1
Application Temperature °F
-31-+160  (-35-+70ºC)
Max service temperature °F
-40-+176  (-40-+80ºC)

Groupes de Produits : Ruban Polypropylène

Envoyer à ce fournisseur
  • *Sujet:
  • pour:

  • *Messages:
    Votre message doit comporter de 20 à 8000 caractères